PRODUCTS CENTER
Big four open three color double side printing offset press
PRODUCT PARAMETERS
Introduction

1. The machine is intelligent, economical and practical.

2. Compact structure, convenient operation, adjustment and maintenance.

3. The structure of three inks and two waters is adopted to make the water and ink more uniform and ensure the better reproduction of the printed matter.

4. It can realize many kinds of printing modes, such as monochrome one-sided printing, two-color one-sided printing, three color one-sided printing, monochrome two-sided printing, positive two-color and negative one-color printing, positive three-color and negative one-color printing, etc.

5. Pneumatic clutch pressure, pneumatic by water by ink, touch screen control, one button operation, high degree of automation.

6. Adopt advanced PLC programmable controller, stable performance, low failure rate.

product mix

1. Accurate positioning: the front gauge and double roller type pull gauge structure are used for positioning, the side guide plate of paper continuation is fine tuned, and the plate cylinder is fine tuned.

2. Double sheet detection: double sheet controller can effectively control double sheets and multiple sheets, and automatically eliminate double sheets and multiple sheets without stopping the machine.

3. Ink separation: the water supply and ink supply system can be separated, and the amount of ink can be adjusted freely to meet the requirements of different printing products for ink, which is more suitable for color overprint.

4. Disorderly parking: the paper receiving desk will stop automatically when the paper is disorderly received, and give an alarm to avoid unnecessary loss caused by disorderly paper.

5. Pneumatic clutch pressure, pneumatic by water by ink, touch screen control, one button operation, high degree of automation.

6. Circuit: PLC computer program control and high-power frequency control are adopted to make the circuit run more stable.

7. Powder spraying function: preset powder spraying device, so that the powder spraying and printing can be completed simultaneously, which can prevent the back of the printed matter from rubbing dirty.

Technical parameter

Machine model

ZJ62SM(3+1)NP

Paper size

620x450mm

Printing area

605x440mm

Plate size

620x480x0.15mm

Rubber cloth size

620x505x1.95mm

Paper type

40-120g/m²

Number of rollers

14 front (3 ink rollers on the plate)

10 on the opposite side (2 by plate ink roller)

Number of water rollers

Front 5 (rely on version water roll 2)

4 on the reverse side (1 on the plate)

Registration mechanism

Roller side pull gauge

Printing speed

2000-6000 sheets / hour

Motor power

Main motor 3.0kw/220v

Air pump motor 1.5kw/220v

Machine dimensions

4820x1100x1800mm

Machine weight

3200kg


Production process
Sample
Pro Details
Pro Video